3Com MSR 50, MSR 30 manual Display bgp network, Advertised with the network command, 965

965

Table 215 Description on the fields of the display bgp group command

Field	Description
Configured hold timer value	Holdtime interval
Keepalive timer value	Keepalive interval
Minimum time between advertisement	Minimum time between advertisement runs
runs
Peer Preferred Value	Preferred value of the routes from the peer
No routing policy is configured	No routing policy is configured for the peer
Members	Detailed information of the members in the peer
	group
Peer	IPv4 address of the peer
V	BGP version running on peers
AS	AS number of the peers
MsgRcvd	Number of messages received
MsgSent	Number of messages sent
OutQ	Number of messages to be sent
PrefRcv	Number of prefixes received
Up/Down	The lasting time of a session/the lasting time of
	present state (when no session is established)
State	State machine of peer

display bgp network

Syntax	display bgp network
View	Any view
Parameters	None
Description	Use the display bgp network command to display routing information
	advertised with the network command.
Examples	# Display routing information that has been advertised.
	<Sysname> display bgp network

BGP Local Router ID is 10.1.4.2.
Local AS Number is 400.
Network	Mask	Route-policy	Short-cut

100.1.2.0255.255.255.0

100.1.1.0	255.255.255.0	Short-cut
Table 216 Description on the fields of the display bgp network command
Field		Description
BGP Local Router ID		BGP Local Router ID
Local AS Number		Local AS Number
Network		Network address