3Com MSR 30, MSR 50 manual Lapb and X.25 Configuration Commands

Models: MSR 50 MSR 30

1 2742
Download 2742 pages 31.98 Kb
Page 422
Image 422

422CHAPTER 26: LAPB AND X.25 CONFIGURATION COMMANDS

[Sysname-Serial2/1] quit

[Sysname] x25 hunt-group hg1 round-robin

[Sysname-hg-hg1] channel interface serial 2/1 dlci 100

# Add the XOT channel with a destination of 10.1.1.2 to hunt group hg1.

<Sysname> system-view

[Sysname] x25 hunt-group hg1 round-robin

[Sysname-hg-hg1] channel xot 10.1.1.2

display interface

Syntax display interface [ interface-type [ interface-number ] ]

View Any view

Parameter interface-type[ interface-number]: Specifies an interface by its type and number.

Description Use the display interface command to view the interface information.

Example # Encapsulate Serial2/0 with X.25 protocol and view the interface information.

<Sysname> system-view [Sysname] interface serial2/0

[Sysname-Serial2/0] link-protocol x25 dce

[Sysname-Serial2/0] display interface serial 2/0 Serial2/0 current state: UP

Line protocol current state: UP

Description: Serial2/0 Interface

The Maximum Transmit Unit is 1500, Hold timer is 10(sec)

Internet protocol processing : disabled

Link-protocol is X.25 DCE Ietf, address is , state R1, modulo 8 window sizes input:2 output:2, packet sizes input:128 output:128 Channels: Incoming-only 0-0, Two-way 1-1024, Outgoing-only 0-0 Timers: T10 60, T11 180, T12 60, T13 60, Idle_Timer 0 (seconds)

New configuration(will be effective after restart): modulo 8 window sizes input:2 output:2, packet sizes input:128 output:128 Channels: Incoming-only 0-0, Two-way 1-1024, Outgoing-only 0-0

Statistic: Restarts 0 (Restart Collisions 0) Refused Incoming Call 0, Failing Outgoing Call 0 input/output: RESTART 1/1 CALL 0/0 DIAGNOSE 0/0

DATA 0/0 INTERRUPT 0/0 Bytes 0/0

RR0/0 RNR 0/0 REJ 0/0 Invalid Pr: 0 Invalid Ps: 0 Unknown: 0

Link-protocol is LAPB

LAPB DCE, module 8, window-size 7, max-frame 12056, retry 10 Timer: T1 3000, T2 1500, T3 0 (milliseconds), X.25-protocol state CONNECT, VS 1, VR 1, Remote VR 1

IFRAME 1/1, RR 1/1, RNR 0/0, REJ 0/0 FRMR 0/0, SABM 0/1, DM 0/0, UA 1/0

DISC 0/0, invalid ns 0, invalid nr 0, link resets 0

Output queue : (Urgent queuing : Size/Length/Discards) 0/50/0

Output queue : (Protocol queuing : Length) 0/500/0

Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0

Physical layer is synchronous, Baudrate is 64000 bps

Interface is DCE, Cable type is V35, Clock mode is DCECLK

Last clearing of counters: Never

Last 300 seconds input rate 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec

Last 300 seconds output rate 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec

Input: 208 packets, 6329 bytes

Page 422
Image 422
3Com MSR 30, MSR 50 manual Lapb and X.25 Configuration Commands