D-Link DI-707P user manual Configuring the Ethernet Broadband Router, Start-up and Log

Configuring the Ethernet Broadband Router

The DI-707P provides Web based configuration. You can configure your DI-707P through your Netscape Communicator or Internet Explorer browser in MS Windows, Macintosh or UNIX based platforms.

Start-up and Log in

Activate your browser, and disable the proxy or add the IP address of the DI-707P into the exceptions . Then, type the IP address of the DI-707P into the Location (for Netscape) or Address (for IE) field and press “Enter.” For example: http://192.168.0.1.

After the connection is established, you will see the web user interface. There are two appearances of web user interface: for general users and for the system administrator.

To log in as an administrator, enter the system password (the factory setting is ”admin”) in the System Password field and click on the Log in button. If the password is correct, the web appearance will be changed into administrator configure mode. As listed in its main menu, there are several options for system administration.

-14-