3Com MSR 30 Display mpls ldp remote-peer, Example # Display information about remote peer BJI

1524 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS

Table 375 Description on the fields of the display mpls ldp peer verbose command

Field	Description
Peer LDP ID	LDP identifier of the peer
Peer Max PDU Length	Maximum PDU length of the peer
Peer Keepalive Timer	Keepalive timer of the peer
Peer Loop Detection	Whether loop detection is enabled on the peer
Peer Path Vector Limit	Limit of the path vector hop count configured on the peer
Peer FT Flag	Whether GR FT is enabled on the peer
Reconnect Timer	GR reconnection timer
Recovery Timer	GR recovery timer
Peer Transport Address	Transport address of the peer
Peer Label Advertisement Mode	Label advertisement mode of the peer
Peer Discovery Source	Discovery source of the peer

display mpls ldp remote-peer

Syntax display mpls ldp remote-peer[ remote-nameremote-peer-name ] [ { begin exclude include } regular-expression ]

View Any view

Parameter remote-peer-name: Name of the remote peer, a case-insensitive string of 1 to 32 characters.

: Filters the output information.

begin: Begins with the specified string.

include: Includes the specified string.

exclude: Excludes the specified string.

regular-expression: Regular expression, a string of 1 to 80 characters. No blank space is acceptable.

Description Use the display mpls ldp remote-peercommand to display information about LDP remote peers.

Related command: mpls ldp (system view), mpls ldp (interface view), remote-ip.

Example # Display information about remote peer BJI.

LDP Remote Entity Information

--------------------------------------------------------------------------

Remote	Peer Name		: BJI
Remote	Peer IP		: 3.3.3.3			LDP ID : 1.1.1.1:0
Transport Address : 1.1.1.1
Configured		Keepalive Timer		:	45	Sec
Configured		Hello Timer		:	45	Sec