3Com MSR 30, MSR 50 manual Time-out, Related command ike proposal and display ike proposal

2172 CHAPTER 141: IKE CONFIGURATION COMMANDS

Before an SA expires, IKE will negotiate a new SA. As soon as the new SA is set up, it takes effect immediately and the old one will be cleared automatically when it expires.

Related command: ike proposal and display ike proposal.

Example # Specify the ISAKMP SA lifetime for IKE proposal 10 as 600 seconds (10 minutes).

<Sysname> system-view

[Sysname] ike proposal 10

[Sysname-ike-proposal-10] sa duration 600

time-out

Syntax time-out time-out

undo time-out

View IKE DPD view

Parameter time-out: DPD packet retransmission interval in seconds, in the range 1 to 60.

Description Use the time-outcommand to set the DPD packet retransmission interval for a DPD.

Use the undo time-outcommand to restore the default.

By default, the DPD packet retransmission interval is 5 seconds.

Example # Set the DPD packet retransmission interval for dpd2 to 1 second.

<Sysname> system-view

[Sysname] ike dpd dpd2

[Sysname-ike-dpd-dpd2] time-out 1