3Com MSR 30, MSR 50 manual Isdn protocol-mode, Isdn protocol-type

584CHAPTER 37: ISDN CONFIGURATION COMMANDS

Example # Configure the slide window size on the interface CE1/PRI 1/0 to 10.

<Sysname> system-view [Sysname] controller e1 1/0 [Sysname-E1 1/0] using ce1 [Sysname-E1 1/0] quit [Sysname]interface serial 1/0:15

[Sysname-Serial1/0:15] isdn pri-slipwnd-size 10

isdn protocol-mode

Syntax isdn protocol-mode { network user }

undo isdn protocol-mode

View Interface view

Parameter mode: ISDN protocol mode to be set, which can be network (for network side mode) and user (for user side mode).

Description Use the isdn protocol-modecommand to set the protocol mode for an ISDN interface.

Use the undo isdn protocol-modecommand to restore the default protocol mode.

By default, an ISDN interface operates in the user side mode.

Example # Set the protocol mode to network side mode for BRI 2/0 interface (assuming that the interface is a BSV interface).

<Sysname> system-view

[Sysname] interface bri 2/0

[Sysname-Bri2/0] isdn protocol-mode network

isdn protocol-type

Syntax isdn protocol-type protocol

undo isdn protocol-type

View ISDN interface view

Parameter protocol: ISDN protocol, which can be ANSI,AT&T, DSS1, ETSI, NI, NI2,NTT, or QSIG.

Description Use the isdn protocol-typecommand to set the ISDN protocol to be run on an ISDN interface.

Use the undo isdn protocol-typecommand to restore the default.