3Com MSR 50, MSR 30 manual Primary authentication Radius scheme view, 1959

1959

Use the undo primary accounting command to restore the defaults.

By default, the default IP address is 0.0.0.0, and the default port number 1813.

Note that:

■The IP addresses of the primary and secondary accounting servers cannot be the same. Otherwise, the configuration fails.

■The RADIUS service port configured on the device and that of the RADIUS server must be consistent.

Related command: key (RADIUS scheme view), radius scheme, state.

Example # Set the IP address of the primary accounting server for RADIUS scheme radius1 to 10.110.1.2 and the UDP port of the server to 1813.

<Sysname> system-view

[Sysname] radius scheme radius1

[Sysname-radius-radius1] primary accounting 10.110.1.2 1813

primary authentication (RADIUS scheme view)

Syntax primary authentication ip-address[ port-number]

undo primary authentication

View RADIUS scheme view

Parameter ip-address: IP address of the primary authentication/authorization server.

port-number: UDP port number of the primary authentication/authorization server, which ranges from 1 to 65535.

Description Use the primary authentication command to configure the IP address and UDP port of the primary RADIUS authentication/authorization server.

Use the undo primary authentication command to restore the defaults.

By default, the default IP address is 0.0.0.0, and the default port number 1812.

Note that:

■After creating a RADIUS scheme, you are supposed to configure the IP address and UDP port of each RADIUS server (primary/secondary authentication/authorization or accounting server). The configuration of RADIUS servers is at your discretion except that there must be at least one authentication/authorization server and one accounting server. Besides, ensure that the RADIUS service port settings on the device are consistent with the port settings on the RADIUS servers.

■The IP addresses of the primary and secondary authentication/authorization servers cannot be the same. Otherwise, the configuration fails.