3Com MSR 50, MSR 30 manual Differential-delay, Display interface ima-group, 115

115

By default, the line coding format of an ATM E1 interface is HDB3, and that of an

ATM T1 interface is B8ZS.

Example # Set the line coding format to AMI for ATM 5/0 interface.

<Sysname> system-view

[Sysname] interface atm 5/0

[Sysname-Atm5/0] code ami

differential-delay

Syntax differential-delay milliseconds

undo differential-delay

View IMA group interface view

Parameter milliseconds: Maximum differential delay, in the range 25 to 100 milliseconds.

Description Use the differential-delaycommand to set the maximum differential delay for the member links in the IMA group.

Use the undo differential-delaycommand to restore the default, that is, 25 milliseconds.

Example # Set the maximum differential delay for the member links in IMA group 1 to 25 milliseconds.

<Sysname> system-view [Sysname] interface atm 5/0 [Sysname-Atm5/0] ima ima-group 1

[Sysname-Atm5/0] interface ima-group 5/1 [Sysname-Ima-group5/1] differential-delay 25

display interface ima-group

Syntax display interface ima-group [ group-interfacenumber]

View Any view

Parameter group-interfacenumber: IMA group interface number.

Description Use the display interface ima-groupcommand to display the configuration and status information about an IMA group interface or all the IMA group interfaces.

If you specify the group-interfacenumberargument, this command displays the configuration and status information about the IMA group interface identified by the argument. Otherwise, this command displays the configuration and status information about all the IMA group interfaces.