3Com MSR 30, MSR 50 manual Pppoe-server bind, Pppoe-server log-information off

534CHAPTER 33: PPPOE SERVER CONFIGURATION COMMANDS

Table 85 Description on the fields of the display pppoe-server session packet command

Field	Description
InP	In Packets, Packages received
InO	In Octets, Bytes received
InD	In Discards, Received and then discarded packages
OutP	Out Packets, Packages sent
OutO	Out Octets, Bytes sent
OutD	Out Discard, Discarded packages that might be sent

pppoe-server bind

Syntax pppoe-server bind virtual-template number

undo pppoe-server bind

View Interface view

Parameter number: Number of the virtual-template interface, in the range 0 to 1023.

Description Use the pppoe-server bind command to enable PPPoE on the virtual-template specified by the Ethernet interface.

Use the undo pppoe-server bind command to disable PPPoE protocol on the relevant interface.

By default, PPPoE protocol is disabled.

Example # Enable PPPoE on interface Ethernet 1/0, and bind Virtual-Template1 with interface Ethernet 1/0

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] pppoe-server bind virtual-template 1

pppoe-server log-information off

Syntax pppoe-server log-information off

undo pppoe-server log-information off

View System view

Parameter None

Description Use the pppoe-serverlog-information off command to disable the PPPoE server to display the PPP log information.