3Com MSR 30, MSR 50 manual Display interface, Acronyms for different types of Interface, Pvid

164CHAPTER 8: GENERAL ETHERNET INTERFACE CONFIGURATION COMMANDS

Eth4/6	DOWN	auto	auto	access	1
Eth4/7	DOWN	auto	auto	access	1

# Display brief interface information that contains the string “UP”.

<Sysname>	display brief interface include		UP
The brief	information of interface(s) under		route mode:
Interface	Link	Protocol-link	Protocol type	Main IP
Eth0/1	UP	DOWN	ETHERNET	--
Eth0/1	UP	DOWN	ETHERNET	--
NULL0	UP	UP(spoofing)	NULL	--

Table 9 Description on the fields of the display brief interface command.

Field	Description
The brief information of interface(s) under	Brief information of interface(s) in route mode
route mode:
Interface	Interface name
Link	Interface physical link state, which can be up or
	down
Protocol-link	Interface protocol link state, which can be up or
	down
Protocol type	Interface protocol type
Main IP	Main IP
The brief information of interface(s) under	Brief information of interface(s) in bridge mode
bridge mode:
Speed	Interface rate, in bps
Duplex	Duplex mode, which can be half (half duplex),
	full (full duplex), or auto (auto-negotiation).
PVID	Default VLAN ID
Table 10 Acronyms for different types of Interface
Interface name	Acronyms
Ethernet	Eth
GigabitEthernet	GE

display interface

Syntax display interface [ interface-type [ interface-number ] ]

View Any view

Parameter interface-type: Type of a specified interface. interface-number: Number of a specified interface.

Description Use the display interface command to display the current state of a specified interface and related information.

■If neither interface type nor interface number is specified, all interface information will be displayed;