3Com MSR 50, MSR 30 manual 107, Line Rate Configuration Commands, Display qos lr interface, 1779

1779

107

LINE RATE CONFIGURATION

COMMANDS

display qos lr interface

Syntax display qos lr interface [ interface-type interface-number ]

View Any view

Parameters interface-typeinterface-number: Specifies an interface by its type and number.

Description Use the display qos lr interface command to view LR configuration and statistics of an interface or all interfaces.

If no interface is specified, the LR configuration and running statistics of all interfaces will be displayed.

Examples # Display LR configuration and statistics information of all interfaces.

<Sysname> display qos lr interface Interface: Ethernet1/0

Direction: Outbound

CIR 10 (kbps), CBS 1875 (byte), EBS 0 (byte)

Passed : 0/0 (Packets/Bytes)

Delayed: 0/0 (Packets/Bytes)

Active Shaping: NO

Direction: Inbound

CIR 10 (kbps), CBS 1875 (byte), EBS 0 (byte)

Passed : 0/0 (Packets/Bytes)

Delayed: 0/0 (Packets/Bytes)

Active Shaping: NO

Table 475 Description on the fields of the display qos lr command

Field	Description
Interface	Interface name, consisting of interface type and interface number
Direction	Indicates the direction of line rate, i.e. inbound or outbound
CIR	Committed Information Rate, in kbps
CBS	Committed Burst Size, i.e. the depth of token bucket carrying burst
	traffic, in byte
EBS	Excess Burst Size, i.e. the size of the burst traffic exceeding the
	committed traffic in dual-token bucket algorithm, in byte