3Com MSR 30, MSR 50 manual Opaque-capability, Related command delete hop

1638 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS

Parameter ip-address: Defines a node by its link IP address or router ID in dotted decimal notation. In the strict routing approach, this IP address must be a link IP address. In the loose routing approach, this IP address can be either a link IP address or router ID.

include: Includes the specified IP address on the explicit path.

loose: Indicates that the next hop is a loose node which is not necessarily directly connected to current node.

strict: Indicates that the next hop is a strict node which must be directly connected to current node.

exclude: Excludes the specified IP address from the explicit path.

Description Use the next hop command to define a node on the explicit path. By performing this command multiple times, you may define all nodes that the explicit path must traverse in sequence.

By default, next hops are strict hops on an explicit path.

Related command: delete hop.

Example # Exclude IP address 10.0.0.125 from the MPLS TE explicit path p1.

[Sysname-explicit-path-p1] next hop 10.0.0.125 exclude

opaque-capability

Syntax opaque-capability enable

undo opaque-capability

View OSPF view

Parameter enable: Enables the opaque LSA capability.

Description Use the opaque-capabilitycommand to enable the opaque LSA capability for the OSPF process to generate and receive from its neighbors Opaque LSAs.

Use the undo opaque-capabilitycommand to restore the default.

By default, the opaque LSA capability of OSPF is disabled.

Example # Enable the opaque LSA capability of OSPF.

<Sysname> system-view

[Sysname] ospf 100

[Sysname-ospf-100] opaque-capability enable