3Com MSR 50, MSR 30 manual Gvrp registration fixed forbidden normal, Undo gvrp registration

417

gvrp registration

Syntax	gvrp registration { fixed forbidden normal }
	undo gvrp registration
View	Ethernet interface view, port group view
Parameter	fixed: Sets the registration type to fixed.
	forbidden: Sets the registration type to forbidden.
	normal: Sets the registration type to normal.
Description	Use the gvrp registration command to configure the GVRP registration type on
	a port.
	Use the undo gvrp registration command to restore the default.
	The default GVRP registration type is normal.
	Configured in Ethernet interface view, the setting is effective on the current port
	only; configured in port group view, the setting is effective on all ports in the port
	group.
	GVRP provides the following three registration types on a port:
	■ Normal -- Enables the port to dynamically register/deregister VLANs, and to
	propagate both dynamic and static VLAN information.
	■ Fixed -- Disables the port to dynamically register and deregister VLANs or
	propagate information about dynamic VLANs, but allows the port to propagate
	information about static VLANs. A trunk port with fixed registration type thus
	allows only manually configured VLANs to pass through even though it is
	configured to carry all VLANs.
	■ Forbidden -- Disables the port to dynamically register and deregister VLANs,
	and to propagate VLAN information except information about VLAN 1. A trunk
	port with forbidden registration type thus allows only VLAN 1 to pass through
	even though it is configured to carry all VLANs.
	Note that this command is only available on trunk ports.
Related command:	display garp statistics.
Example	# Set the GVRP registration type to fixed on port Ethernet 1/0.
	<Sysname> system-view
	[Sysname] interface ethernet 1/0
	[Sysname-Ethernet1/0] port link-type trunk
	[Sysname-Ethernet1/0] gvrp registration fixed