Operating in Inverter Mode
975-0467-01-01 4–5
Operating Several Loads at Once
If you are going to operate several loads from the Freedom HW, turn
them on one at a time after you have turned the inverter on.
Turning loads on separately helps to ensure that the inverter does not have
to deliver the starting current for all the loads at once, and will help
prevent an overload shutdown.
Adjusting the Audible Alarm
The Freedom HW’s audible alarm can be enabled or disabled. See “To
adjust the alarm setting:” on page 3–6.
Any warnings such as fault conditions or imminent shutdown are both
displayed on the display panel’s screen and sounded on the alarm
speakers. It is not possible to turn OFF the screen and prevent it from
displaying error codes but it is possible to turn OFF the audible alarm.