3Com MSR 30, MSR 50 manual Delay start-dial, Description voice entity view

2574 CHAPTER 173: VOIP CONFIGURATION COMMANDS

Use the undo delay wink-risingcommand to restore the default.

By default, the maximum amount of time the originating side waits for a wink signal after sending a seizure signal is 3,000 milliseconds in the wink start mode.

Related command: em-signal.

Example # Set the maximum amount of time the originating side waits for a wink signal after sending a seizure signal in the wink start mode to 2,000 milliseconds.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] subscriber-line 1/0 [Sysname-voice-line1/0] em-signal wink

[Sysname-voice-line1/0] delay wink-rising 2000

delay start-dial

Syntax delay start-dial seconds

undo delay start-dial

View FXS/FXO voice subscriber line view

Parameter seconds: Dial delay in seconds, in the range of 0 to 10.

Description Use the delay start-dialcommand to configure the dial delay.

Use the undo delay start-dialcommand to restore the default.

By default, the dial delay is 1 second.

Example # Set the dial delay on FXS subscriber line 1/0 to 5 seconds.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] subscriber-line 1/0 [Sysname-voice-line1/0] delay start-dial 5

description (voice entity view)

Syntax description text

undo description

View POTS/VoIP/VoFR entity view

Parameter text: Voice entity description string, consisting of up to 80 characters.

Description Use the description command to configure a voice entity description string.