3Com MSR 30, MSR 50 manual Ppp pap local-user, Ppp timer negotiate

522CHAPTER 31: PPP AND MP CONFIGURATION COMMANDS

ppppap local-user

Syntax ppp pap local-user username password { cipher simple } password

undo ppp pap local-user

View Interface view

Parameter username: Specifies the username sent by the local device when it is authenticated by the peer device via PAP, a string of 1 to 80 characters.

cipher: Displays the password in ciphertext.

simple: Displays the password in plain text.

password: Specifies the password sent by the local device when it is authenticated by the peer device using PAP, a string of 1 to 16 characters. When the simple keyword is used, this password is in plain text. When the cipher keyword is used, this password can be either in ciphertext or plain text. The plain text is a string of no more than 16 characters, like aabbcc. The ciphertext has a fixed length of 24 characters, like _(TT8F]Y5SQ=^Q‘MAF4<1!!.

Description Use the ppp pap local-usercommand to configure the username and password sent by the local device when it is authenticated by the peer device via the PAP method.

Use the undo ppp pap local-usercommand to disable the configuration.

By default, both the username and the password are empty.

When the local router is authenticated via the PAP method by the peer device, the username and password sent by the local device must be the same as the username and password of the peer router.

Related command: local-useron page 1940, password on page 1941

Example # Set the username of the local device authenticated by the peer via PAP as user1 and the password as pass1.

<Sysname> system-view

[Sysname] interface serial 1/0

[Sysname-Serial1/0] ppp pap local-user user1 password simple pass1

ppp timer negotiate

Syntax ppp timer negotiate seconds

undo ppp timer negotiate

View Interface view