3Com MSR 30, MSR 50 manual Userlog nat export version, Userlog nat syslog

2042 CHAPTER 133: NAT CONFIGURATION COMMANDS

userlog nat export version

Syntax userlog nat export version version-number

undo userlog nat export version

View System view

Parameter version-number: Version number of NAT logs. Currently, the system supports version 1 only.

Description Use the userlog nat export version command to set the version number of NAT logs.

Use the undo userlog nat export version command to restore the default.

By default, the version number of NAT logs is 1.

Example # Set the version number of NAT logs to 1.

<Sysname> system-view

[Sysname] userlog nat export version 1

userlog nat syslog

Syntax userlog nat syslog

undo userlog nat syslog

View System view

Parameter None

Description Use the userlog nat syslog command to export NAT logs to the information center.

Use the undo userlog nat syslog command to restore the default.

By default, NAT logs are exported to the NAT log server.

Note that as NAT logs may occupy large memory, it is not advisable to export large amount of NAT logs to the information center.

Example # Export NAT logs to the information center.

<Sysname> system-view

[Sysname] userlog nat syslog