3Com MSR 30, MSR 50 dialer priority, dialer queue-length

322 CHAPTER 20: DCC CONFIGURATION COMMANDS
Related command: dialer route.
Example # Set the dial string for placing calls to 11111 on interface Dialer1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] dialer number 11111
dialer priority
Syntax dialer priority priority
undo dialer priority
View Dial interface (physical) view
Parameter priority: Priority of the physical interface in a dialer circular group, in the range 1 to
127.
Description Use the dialer priority command to assign a priority to the physical interface in
its dialer circular group in C-DCC approach.
Use the undo dialer priority command to restore the default.
By default, the priority of a physical interface in its dialer circular group is 1.
This command sets the order in which the available physical interfaces in a dialer
circular group are used. The physical interface with higher priority is used first.
Related command: dialer circular-group.
Example # Set the priority of interface Serial 2/0 in dialer circular group 0 to 5.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] dialer circular-group 1
[Sysname-Serial2/0] dialer priority 5
dialer queue-length
Syntax dialer queue-length packets
undo dialer queue-length
View Dial interface (physical or dialer) view
Parameter packets: Number of packets that can be buffered on the interface, in the range 1
to 100.