3Com MSR 30, MSR 50 Modem timer answer, Syntax modem timer answer time Undo modem timer answer

492CHAPTER 29: MODEM CONFIGURATION COMMANDS

Use the undo modem auto-answercommand to disable the connected external modem to answer automatically. In this case, the modem answers only when receiving an AT command sent by software.

By default, the connected external modem is set to non-auto answer mode.

Use this command depending on the answer state of the connected external modem. When the modem is in auto-answer mode (AA LED of the modem lights), configure the modem auto-answercommand to prevent the router from sending an answer command after the modem answers automatically. If the modem is in non-auto answer mode, configure the undo modem auto-answercommand.

n If the configuration of this command is not consistent with the current answer state of the connected modem, anomalies may occur. You are not encouraged to configure this command.

Example # Set the answer mode of the modem connected to the asynchronous serial interface User-interface1 to auto.

<Sysname> system-view

[Sysname] user-interface tty 1

[Sysname-ui-tty1] modem auto-answer

modem timer answer

Syntax modem timer answer time

undo modem timer answer

View User interface view

Parameter time: Timeout time, in the range 1 to 60 seconds.

Description Use the modem timer answer command to set the interval from user hookoff to dial.

Use the undo modem timer answer command to restore the default.

By default, the valid interval is 30 seconds.

n This command is only valid for AUX interface and other asynchronous interfaces.

Example # Set the valid interval from user hookoff to dial to 50 seconds.

<Sysname> system-view

[Sysname] user-interface aux 0

[Sysname-ui-aux0] modem timer answer 50