3Com MSR 30, MSR 50 manual Display rip database, Syntax display rip process-iddatabase, X.X/X

1164 CHAPTER 77: RIP CONFIGURATION COMMANDS

Table 278 Description on the fields of the display rip command

Field	Description
Timeout time	RIP timeout time
Suppress time	RIP suppress interval
Garbage-collect time	RIP garbage collection interval
TRIP retransmit time	TRIP retransmit interval for sending update requests and
	responses
TRIP response packets retransmit	Maximum retransmit times for update requests and
count	responses
Silent interfaces	Number of silent interfaces, which do not periodically
	send updates
Default routes	Indicates whether a default route is sent to RIP neighbors
Verify-source	Indicates whether the source IP address is checked on the
	received RIP routing updates
Networks	Networks enabled with RIP
Configured peers	Configured neighbors
Triggered updates sent	Number of sent triggered updates
Number of routes changes	Number of changed routes in the database
Number of replies to queries	Number of RIP responses

display rip database

Syntax display rip process-iddatabase

View Any view

Parameters process-id: RIP process number, in the range of 1 to 65535.

Description Use the display rip database command to display the active routes in the RIP database, which are sent in normal RIP routing updates.

Examples # Display the active routes in the database of RIP process 100.

<Sysname> display rip 100 database 10.0.0.0/8, cost 1, ClassfulSumm

10.0.0.0/24, cost 1, nexthop 10.0.0.1, Rip-interface

11.0.0.0/8, cost 1, ClassfulSumm

11.0.0.0/24, cost 1, nexthop 10.0.0.1, Imported

Table 279 Description on fields of the display rip database command

Field	Description
X.X.X.X/X	Destination address and subnet mask
cost	Cost of the route
classful-summ	Indicates the route is a RIP summary route.
Nexthop	Address of the next hop
Rip-interface	Routes learnt from a RIP-enabled interface
imported	Routes redistributed from other routing protocols