3Com MSR 30, MSR 50 manual Mac-address bridge-template interface view, Map bridge-group

560CHAPTER 36: BRIDGING CONFIGURATION COMMANDS

mac-address (bridge-template interface view)

Syntax mac-address mac-address

undo mac-address

View Bridge-template interface view

Parameters mac-address: MAC address, in the format of H-H-H

Description Use the mac-addresscommand to configure a MAC address for the current bridge-template interface.

Use the undo mac-addresscommand to configure the configured MAC address of the current bridge-template interface.

By default, if a bridge set contains Ethernet interfaces, its bridge-template interface will use the MAC address of a random Ethernet interface. If the bridge set contains no Ethernet interfaces, its bridge-template interface will use the system default MAC address.

Related command: interface bridge-template.

n Different models of devices may have different deferent system default MAC addresses. Refer to your specific device model.

Example # Set the MAC address of the bridge-template interface of bridge set 1 to 0000-0011-0011.

<Sysname> system-view

[Sysname] interface bridge-template 1

[Sysname-Bridge-template1] mac-address 0000-0011-0011

map bridge-group

Syntax map bridge-group broadcast

undo map bridge-group

View PVC view

Parameters None

Description Use the map bridge-group broadcast command to enable bridging over the current PVC.

Use the undo map bridge-groupcommand to disable bridging over the current

PVC.