Paradyne 4200 Ed-Syncn, 13-2, 1. ED-SYNCN Command Parameters, ED-SYNCNtidaidsyncnctagsyncnnblk

13. Synchronization Commands

ED-SYNCN

The ED-SYNCN Command configures the reference source for synchronization of the NE clock.

Table 13-1. ED-SYNCN Command Parameters

ED-SYNCN:[tid]:[aid_syncn]:[ctag]:::[syncn_nblk];

Restrictions: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
[aid_syncn]	AID of the NE clock. The value is CLKSRCNT.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.
syncn_nblk	Named parameter block for SYNCN. The block consists of one or more
	of the following parameters, in any order separated by commas, each
	followed by an equal sign and a valid value. If not specified, the value of
	this parameter remains unchanged.

PRICREF: Primary reference source for synchronizing the clock. Valid values are:

–LOOP: Loop timing recovered from network side facility

–LOCAL: Local oscillator on NT board

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* ED-SYNCN:[tid]:[aid_syncn]:[ctag]:::[syncn_nblk] */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* ED-SYNCN:[tid]:[aid_syncn]:[ctag]:::[syncn_nblk] */ aid:ERRCDE=errcde

/* error description */

;

13-2 August 2002 4200-A2-GB20-00