Carrier Access 770-0125-AB TL1 Software Upgrade Commands, RTRV-SW-VERNSP1234ALL

Configuration

Upgrading System Software

TL1 Software Upgrade Commands

To display the version of system software running on your BROADway, use the RTRV-SW-VERTL1 command:

RTRV-SW-VER::<aid>:1234::ALL;

<aid>—NSP-1, NSP-2, or NSP (for both NSPs).

Examples:

Display the BROADway software version loaded on NSP-1:

RTRV-SW-VER::NSP-1:1234::;

Display the BROADway software version number loaded on both NSPs:

RTRV-SW-VER::NSP:1234::ALL;

To change the executable system software image on the BROADway system, use the SET-UPGRADETL1 command:

SET-UPGRADE::<aid>:1234::<filename>,ALL;

<aid>—NSP-1, NSP-2, or NSP (for both NSPs). <filename>—The name of the new system software image file.

Examples:

Load the BROADway software on NSP-1 with the file bw308 (Release 3.08):

SET-UPGRADE::NSP-1:1234::bw308;

Load the BROADway software on both NSPs with the file bw308 (Release 3.08):

SET-UPGRADE::NSP:1234::bw308,ALL;

CAUTION! THE SET-UPGRADECOMMAND CAUSES THE SYSTEM TO AUTOMATICALLY REBOOT FROM THE SOFTWARE IMAGE SPECIFIED IN THE COMMAND LINE. THIS IMAGE MUST HAVE PREVIOUSLY BEEN DOWNLOADED USING FTP TO THE FLASH MEMORY ON THE BROADWAY SYSTEM. SET-UPGRADEAUTOMATICALLY UNZIPS THE SOFTWARE IMAGE INTO THE EXECUTABLE APPLICATION FILES THAT THE BROADWAY SYSTEM WILL USE TO OPERATE.

3-34 BROADway - Release 4.00