Carrier Access 770-0125-AB Interface Red LED Interface Green Status Bottom LED Top

Installation

Installing the BSP200 Line Interface Card

If the card failure sequence is displayed, remove the card and re-insert it into the chassis. If the card failure sequence is still displayed, then replace the card.

Line status (per port):

INTERFACE Red LED	INTERFACE Green	Status
(Bottom)	LED (Top)
Off	Off	The card is not configured, or
		alarm reporting is disabled on the
		interface
Off	On	Interface operating normally
Off	Blinking	Interface performing a diagnostic
		test
On	Off	Interface failure (LOS, OOF, AIS)
Blinking	Off	Yellow alarm (RAI)
On	On	Interface initializing during system
		power up

BROADway - Release 4.00 2-23