Carrier Access 770-0125-AB installation manual NSP1 set-upgradensp1234bw308,all

M 99 NSP-1,

M 99 NSP-1,

;

Configuration

Upgrading System Software

4.To complete the software upgrade, use the set-upgradecommand to decompress the software image, copy it to the backup NSP101 and reboot the BROADway system:

NSP1> set-upgrade::nsp:1234::bw308,all;

Sending file /FLASH/bw308.zip to peer NSP.....................

SET-BOOT bw308 command executing in peer NSP..................

SET-BOOT bw308 command executing in local NSP INIT-SYS command executing in peer NSP

/* LOCAL SYSTEM REBOOTING */ 2003-04-08 12:58:42

COMPLD

CAUTION! THE SET-UPGRADECOMMAND CAUSES THE SYSTEM TO AUTOMATICALLY REBOOT FROM THE SOFTWARE IMAGE SPECIFIED IN THE COMMAND LINE. THIS IMAGE MUST HAVE PREVIOUSLY BEEN DOWNLOADED USING FTP TO THE FLASH MEMORY ON THE BROADWAY SYSTEM. SET-UPGRADEAUTOMATICALLY UNZIPS THE SOFTWARE IMAGE INTO THE EXECUTABLE APPLICATION FILES THAT THE BROADWAY SYSTEM WILL USE TO OPERATE.

To upgrade a BROADway system with a single NSP only, use the following format for the

set-upgrade command:

NSP1> set-upgrade::nsp:1234::bw308;

SET-BOOT bw308 command executing in local NSP /* LOCAL SYSTEM REBOOTING */

2003-04-08 10:52:29

COMPLD

CAUTION! THE SET-UPGRADECOMMAND CAUSES THE SYSTEM TO AUTOMATICALLY REBOOT FROM THE SOFTWARE IMAGE SPECIFIED IN THE COMMAND LINE. THIS IMAGE MUST HAVE PREVIOUSLY BEEN DOWNLOADED USING FTP TO THE FLASH MEMORY ON THE BROADWAY SYSTEM. SET-UPGRADEAUTOMATICALLY UNZIPS THE SOFTWARE IMAGE INTO THE EXECUTABLE APPLICATION FILES THAT THE BROADWAY SYSTEM WILL USE TO OPERATE.

BROADway - Release 4.00 3-31