Carrier Access 770-0125-AB ENT-USERNSP1234joetech,mypassword,ADMIN,TL1, DLT-USERNSP1234username

Configuration

Setting Up User Accounts

For example:

ENT-USER::NSP:1234::joetech,mypassword,ADMIN,TL1;

This command adds an account to the system where the username is joetech, the password is mypassword, the security level is ADMIN and the default shell is TL1.

For all TL1 commands, after performing an ENT or ED command (to add or edit information), you should always use the corresponding RTRV command to verify that your additions or changes were made correctly.

For example, after using the ENT-USERcommand to add users, use the RTRV-USER::NSP:1234::ALL;command to view all user accounts.

Editing User Accounts

To edit a user’s user name, password, and security level, use the ED-USERTL1 command:

ED-USER::NSP:1234::<username>,<password>,<security>,<shell>;

<username>—The name of the user account. <password>—The account's password.

<security>—The security level to assign to this account, either ADMIN, CONFIG, MAINT, or

READER.

<shell>—Indicates what the default command shell prompt is for this account, either TL1 or IPCLI (for packet services).

Deleting User Accounts

To delete a user, use the DLT-USERTL1 command:

DLT-USER::NSP:1234::<username>;

<username>—The name of the user account.

BROADway - Release 4.00 3-17