Carrier Access 770-0125-AB installation manual Attaching the Front Panel

Installation

Attaching the Front Panel

Line status (per port):

INTERFACE Red LED	INTERFACE Green	Status
(Bottom)	LED (Top)
Off	Off	The card is not configured, or
		alarm reporting is disabled on the
		interface
Off	On	Interface operating normally
Off	Blinking	Interface performing a diagnostics
		test
On	Off	Interface failure (LOS, OOF, AIS)
Blinking	Off	Yellow alarm (RAI)
On	On	Interface initializing during system
		power up

Attaching the Front Panel

After inserting the cards and cabling the BROADway you must secure the front panel to the BROADway chassis.

To attach the front panel:

1.Place the front panel on the front of the chassis, hooking the slots into the bottom and lining up the four screws.

2.Flip up the front panel to close it securely against the front of the chassis.

3.Screw in the four screws to properly secure the front panel to the chassis.

2-28 BROADway - Release 4.00