Storing only desired stations
You can manually preset desired stations.
./> control dial
1 Press (SOURCE) repeatedly to select the radio.
2 Press (MODE) repeatedly to select the band.
3 Press the
4 Press (MENU), then rotate the
./> control dial until “Preset
Edit” appears.
5 Press the ./> control dial.
6 Rotate the ./> control dial to select the number that you want to store.
7 Press the ./> control dial.
The stored station indication appears in the display.
8 Press (MENU) twice.
Note
If you try to store another station on the same stored number, the previously stored station will be erased.
Operating with the card remote commander
1 Press (SOURCE) repeatedly to select the radio.
2 Press (MODE) repeatedly to select the band.
3 Press (SEEK
4 Press the desired number button ((1) to (6)) until “MEM” appears.
Storing station names
— Station Memo
You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name using up to 8 characters for a station.
Storing the station names
1 Tune in a station whose name you want to store.
2 Press (MENU), then rotate the
./> control dial until “Name Edit” appears.
3 Press the ./> control dial.
4 Enter the characters.
1Rotate the ./> control dial to select the desired character.
A y B y C ... y 0 y 1 y 2 ... y
+y – y * ... y 
* y A
*(blank space)
2Press the M+ button after locating the desired character.
If you press the
3Repeat steps 1 and 2 to enter the entire name.
5 Press the ./> control dial.
Tips
•Simply overwrite or enter “ 
” to correct or erase a name.
•There is another way to start storing station names: Press (LIST) for 2 seconds instead of performing steps 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5.
•If no memory is remaining, “Mem Full” appears in the display, and you cannot assign a station name.
continue to next page t 17
