Labeling a CD
—Disc Memo (For a CD unit with the CUSTOM FILE function)
You can label each disc with a custom name (Disc Memo). You can enter up to 8 characters for a disc. If you label a CD, you can locate the disc by name (page 15).
Caution
Do not use the CUSTOM FILE feature while driving, or perform any other function which could divert your attention from the road.
./> control dial
1 Start playing the disc you want to label in a CD unit with the CUSTOM FILE function.
2 Press (MENU), then rotate the
./> control dial until “Name Edit” appears.
3 Press the ./> control dial.
The unit will repeat the disc during the labeling procedure.
4 Enter the characters.
1Rotate the ./> control dial to select the desired character.
A y B y C ... y 0 y 1 y 2 ... y
+y – y * ... y 
* y A
*(blank space)
2Press the M+ button after locating the desired character.
If you press the
3Repeat steps 1 and 2 to enter the entire name.
5 To return to normal CD play mode, press the ./> control dial.
Tips
•Simply overwrite or enter “ 
” to correct or erase a name.
•There is another way to start labeling a CD: Press (LIST) for 2 seconds instead of performing steps 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5.
•You can label CDs on a unit without the CUSTOM FILE function if that unit is connected along with a CD unit that has the function. The Disc Memo will be stored in the memory of the CD unit with the CUSTOM FILE function.
Note
Repeat/shuffle play is suspended until the Name Edit is complete.
Viewing the Disc Memo
As a display item, the Disc Memo always takes priority over any original CD TEXT information.
To | Press |
View | (DSPL) during CD/CD |
| TEXT disc playback |
|
|
Tip
To find out about other items that can be displayed, see page 13.
14
