![](/images/new-backgrounds/1297368/29736849x1.webp)
Tip
The volume level is adjustable from
Adjusting the cut-off frequency for the subwoofer(s)
To match the characteristics of the connected subwoofer(s), you can cut out the unwanted high and middle frequency signals entering the subwoofer(s). By setting the
Level | |
off |
Frequency (Hz)
Selecting the spectrum analyzer
The sound signal level is displayed on a spectrum analyzer. You can select a display for ten patterns
./> control dial
1 Press (SOURCE) to select a source (radio, CD, MD, or AUX).
2 Press (MENU).
3 Rotate the ./> control dial until “SA” appears.
./> control dial
1 During playback or radio reception, press (MENU).
2 Rotate the ./> control dial until “LPF” appears.
3 Press the
off (default setting) y 125 Hz y 78 Hz
4 Press the ./> control dial. After the frequency setting is complete, the display returns to the normal playback mode.
4 Press the
5 Press the ./> control dial.
Labeling a Demo display
— Appearing Characters
You can label a Demo display with up to 64 characters to appear when the unit is turned off. Labels will scroll in the display with Demo set to “on.” (The display remains lit even when the power is off.)
./> control dial
1 Press (OFF).
CD/MD playback or radio reception stops (the key illumination and display remain on).
continue to next page t
25