| ./> control |
| dial |
To | Do this |
Stop playback | Press (OFF). |
Eject the disc | Press Z. |
Skip tracks | Rotate the ./> |
– Automatic | control dial. |
Music Sensor |
|
Press and hold the | |
reverse | M+ button, and release at |
– Manual Search | the desired point. |
Skip albums* | Press (LIST), then rotate the |
– Album selection | ./> control dial. |
*Available only when an MP3 file is played.
To remove the disc, press down the center spindle, and lift up the edge of the disc from the relief in the disc tray.
Notes
•Depending on the recording method used on the disc, it may take a minute or more before playing the first track.
•Depending on the condition of the disc, it may not play back (page 7, 8).
•Such discs should be finalized.
•While the first/last track on the disc is playing, if the
./> control dial is rotated, playback skips to the last/first track of the disc.
•When the last track on the disc is over, playback restarts from the first track of the disc.
•With optional unit connected, playback of the same source will continue on to the optional CD/MD unit.
•There is a delay for a few seconds after pressing Z before the disc tray is ejected, after reading the data in the disc.)
(With optional unit)
1 Press (SOURCE) repeatedly to select “CD” or “MD (MS*).”
2 Press (MODE) repeatedly until the desired unit appears.
Playback starts.
*MS: MG Memory Stick
Cautions when connecting
This unit recognizes
•When you want to play
•When you want to play an MD unit, press (SOURCE) to select “MD” or “MS.” If your desired MD unit appears in the source display, it starts to play. If “MS” or another MD unit appears in the source display, press (MODE) to select your desired MD unit, to start playback.
Locating a disc
— Disc selection
See “Locating a disc by name” on page 15.
12
