Paradyne 4200 Ent-Profile-Trafdsc, 7. ENT-PROFILE-TRAFDSC Command Parameters, Response Format

5. ATM Commands

ENT-PROFILE-TRAFDSC

The ENT-PROFILE-TRAFDSC command creates a new ATM Traffic Descriptor profile.

Table 5-7. ENT-PROFILE-TRAFDSC Command Parameters

ENT-PROFILE-TRAFDSC:[tid]:trafdsc_profile_id:[ctag]::profil e_name,,trafdsc_type:[trafdsc_nblk];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
trafdsc_profile_id	Numeric identifier of a profile (1− 250). Grouping and ranging are
	allowed.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.
profile_name	Name (32 characters maximum) that uniquely identifies profile. The
	value cannot contain any characters other than letters, numbers,
	hyphens (-), and underscores (_).
trafdsc_type	Traffic descriptor type. The valid value is UBR (UBR best effort).
trafdsc_nblk	Named parameter block for the ATM traffic descriptor profile. The valid
	value is:

DISCARD: Partial packet discard

–Yes: Partial packet discard is enabled

–No: Partial packet discard is disabled (default)

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD /*

ENT-PROFILE-TRAFDSC:[tid]:trafdsc:[ctag]::trafdscnm,,trafdsc _type:[trafdsc_nblk]; */

;

5-8 August 2002 4200-A2-GB20-00