Paradyne 4200 manual Ed-User-Secu, 12-8, 7. ED-USER-SECU Command Parameters, Response Format, IP c

12. Security Commands

ED-USER-SECU

The ED-USER-SECU command edits the security levels and other security-related parameters for a user.

NOTE:

You must enter a password to use the ED-USER-SECU command.

Table 12-7. ED-USER-SECU Command Parameters

ED-USER-SECU:[tid]:uid:[ctag]::[newuid],[newpid],,[uap][:];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID code
	is the only other valid value.
uid	User Identification name (10 characters maximum). Input is
	case-sensitive.
[ctag]	Correlation tag (6 characters maximum) that links an input command with
	associated output responses. The default is 0.
[newuid]	New User Identification name (10 characters maximum). Input is
	case-sensitive. The value must be unique within the NE. If not specified,
	the value of this parameter remains unchanged.
[newpid]	New password (8− 10 characters). The value must include at least one
	digit, one letter, and one non-alphanumeric character. Input is
	case-sensitive. If not specified, the value of this parameter remains
	unchanged.
[uap]	User Access Privilege. Valid values are:
	NULL: User has no access rights.
	RTRV: Retrieve. Report and retrieve commands only (no configuring).
	PROV: Configuring (provisioning). Report, retrieve, and configuring
	commands allowed. No system administrator tasks including management
	of the NE.
	SUPER: Supervisor. All user functions allowed.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

12-8 August 2002 4200-A2-GB20-00