Paradyne 4200 manual 5-20, 16. RTRV-PROFILE-TRAFDSC Response Parameters, Example, Related Commands

5. ATM Commands

Table 5-16. RTRV-PROFILE-TRAFDSC Response Parameters

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
trafdsc	As described for command parameters (see Table 5-15,
	RTRV-PROFILE-TRAFSDSC Command Parameters), except ALL is not
	used.
profile_scope	As described for command parameters (see Table 5-15,
	RTRV-PROFILE-TRAFSDSC Command Parameters).
profile_name	A string of characters (32 maximum) that uniquely identifies the profile
	within its scope.
trafdscr_type	Traffic descriptor type. The valid value is UBR (best effort).
trafdsc_nblk	ATM traffic descriptor profile parameter block, containing the following
	parameter:
	DISCARD: Packet discard. Valid values are:
	– Yes: Partial packet discard is enabled.
	– No: Partial Packet discard is disabled.
errcde	Error code (see Appendix A, Error Codes).

Example

Retrieve parameters for profile 6.

RTRV-PROFILE-TRAFDSC:TAMPA:6:42::;

TAMPA 01-11-24 12:30:43 M 42 COMPLD

/* RTRV-PROFILE-TRAFDSC:TAMPA:6:42:: */ 6:TAMPA101,LOCAL,UBR,DISCARD=YES

;

Related Commands

DLT-PROFILE-TRAFDSCon page 5-2

ENT-PROFILE-TRAFDSCon page 5-8

5-20 August 2002 4200-A2-GB20-00