Paradyne 4200 manual 2. REPT-OPSTAT-ADSLCOM Response Parameters, Explanation

9. Performance Commands

Table 9-2. REPT-OPSTAT-ADSLCOM Response Parameters

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_adsl	As described for command parameters (see Table 9-1,
	REPT-OPSTAT-ADSLCOM Command Parameters).
op_adsl	ADSL operational parameter. Parameters are:
	STATUSNE: Current status of near-end modem (ATU-C). Values are:
	– NORMAL: no failure condition
	– LOF: Loss Of Framing
	– LOS: Loss Of Signal
	– LORATE: Line rate is below planned rate (Loss of Signal Quality)
	– LOL: Loss Of Link
	– LOCD: Loss Of Cell Delineation
	– INITF: modem initialization failure
	– NOPEER: No peer ATU present
	STATUSFE: Current status of far-end modem (ATU-R). Values are:
	– NORMAL (no failure condition)
	– LOF (loss of framing) LOS (loss of signal)
	– LORATE: Line rate is below planned rate (Loss of Signal Quality)
	– LPR (loss of power to modem)
	LASTCHNGDATE: Date of last change in the operational state of the
	modem. Values are mm-dd (month and day), where mm= 00 −	12 and
	dd = 00 − 31.
	LASTCHNGTIME: Time of last change in the operational state of the
	modem. Values are hh-mm (hour and minute), where hh = 00 −	23 and
	mm = 00 − 59.
value	Value of parameter specified by op_adsl

4200-A2-GB20-00 August 2002 9-3