Paradyne 4200 manual Rtrv-Profile-Adslup, 3-50, 39. RTRV-PROFILE-ADSLUP Command Parameters, IP c

3. ADSL Facility Commands

RTRV-PROFILE-ADSLUP

The RTRV-PROFILE-ADSLUP command enables you to retrieve ADSL line configuration parameters associated with the upstream direction (from ATU-R to ATU-C) in an ADSL Profile. See ENT-PROFILE-ADSLon page 3-24for information on how to create a new ADSL profile.

Table 3-39. RTRV-PROFILE-ADSLUP Command Parameters

RTRV-PROFILE-ADSLUP:[tid]:adsl_profile_id:[ctag][::,profile _scope];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. TID is optional and has a default value of
	null. The NE's SID code is the only other valid value.
adsl_profile_id	Numeric identifier of a profile (1− 30).
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.
profile_scope	The scope of a profile. The valid value is LOCAL (local to this stack
	only). If no parameter is specified, this value is ignored (all values are
	reported).

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD /*

RTRV-PROFILE-ADSLUP:[tid]:adsl_profile_id:[ctag]:[::,profile _scope] */

adsl_profile_id:profile_scope:profile_name:adslprof_nblk

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-PROFILE-ADSLUP:[tid]:adsl_profile_id:[ctag][::profile_ scope] */

errcde

;

3-50 August 2002 4200-A2-GB20-00