Paradyne 4200 Paradyne Syslog MIB pdnsyslog.mib, C-39, Object, Description, Setting/Contents

C. Traps and MIBs

Table C-16. Paradyne Security MIB Objects (2 of 2)

Object	Description	Setting/Contents
devSecurityTelnetSourceValidation	Enables or disables Telnet source address	Valid values are:
	screening.	disable(1)
		enable(2)
devSecurityFtpSourceValidation	Enables or disables FTP source address	Valid values are:
	screening.	Tdisable(1)
		enable(2)
securityMgrIpAddress	Specifies the IP address that identifies the	IP address.
	SNMP manager(s) authorized to send SNMP
	messages.
securityMgrSubnetMask	Specifies the subnet mask.	IP address.
securityMgrSnmpAccess	Specifies the SNMP access to the device.	Integer.
securityMgrTelnetAccess	Specifies Telnet access to the device.	Integer.
securityMgrFtpAccess	Specifies FTP access to the device.	Integer.
securityMgrTrapAccess	Specifies the trap access to the device.	Integer.
securityMgrRowStatus	Specifies the status fo this table entry	Row status.
devSecuritySNMPMgrAccess	Enables or disables SNMP access to the	Integer.
	system.

Paradyne Syslog MIB (pdn_syslog.mib)

The Paradyne Syslog MIB (pdn_syslog.mib) defines a set of objects for managing syslog messages. The objects listed in Table C-17, Paradyne Syslog MIB Objects, are supported.

Table C-17. Paradyne Syslog MIB Objects (1 of 2)

Object	Description	Setting/Contents
pdnSyslogStatus	Enables or disables syslog event generation.	Valid values are:
		TDisable(1)
		Enable(2)
pdnsyslogIPAddr	Specifies the IP address of a syslog server. If	IP address.
	the IP address is known, then this can be
	used for the remote syslog daemon.
pdnSyslogPort	Corresponds to a UDP port number to which	The default is 514.
	system events are sent.

4200-A2-GB20-00 August 2002 C-39