Paradyne 4200 10-36, sid yy-mm-dd hhmmss M c COMPLD RTRV-COND-EQPTtidaideqptctagcondeqpt, IP c

10. Fault Commands

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* RTRV-COND-EQPT:[tid]:aid_eqpt:[ctag]::[cond_eqpt] */

"aid_eqpt,[aid_type]:[ntfncde],cond_eqpt,serveff,,,,,,{cond_ descr}"

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-COND-EQPT:[tid]:aid_eqpt:[ctag]::[cond_eqpt] */ errcde

;

Table 10-22. RTRV-COND-EQPT Response Parameters (1 of 2)

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_eqpt	As described for command parameters (see Table 10-21,
	RTRV-COND-EQPT Command Parameters), except ALL is not used.
aid_type	The type of Access Identifier. The value is EQPT.
[ntfncde]	Notification code. Valid values are:
	CR: Critical alarm
	MJ: Major alarm
	MN: Minor alarm
	NA: Not alarmed (reported via REPORT EVENT)

10-36 August 2002 4200-A2-GB20-00