Paradyne 4200 Inh-Msg-All, 14-9, 8. INH-MSG-ALL Command Format, INH-MSG-ALLtidaidallctagntfcnde

14. System Commands

INH-MSG-ALL

The INH-MSG-ALL command inhibits the reporting of all autonomous messages at or below a specified severity level. This command affects only the issuing user’s session and has no effect on other indicators or on NE operation. The NE continues to respond fully to RTRV-ALM and RTRV-COND commands.

Table 14-8. INH-MSG-ALL Command Format

INH-MSG-ALL:[tid]:[aid_all]:[ctag]::[ntfcnde];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	The identification of the target NE. TID is optional and has a default
	value of null. The NE's SID code is the only other valid value.
[aid_all]	Access Identifier for all entities. The value is ALL.
[ctag]	The correlation tag (6 characters maximum) that links an input
	command with associated output responses. It is optional with a default
	of 0.
[ntfcncde]	Notification code for some autonomous messages. Grouping is allowed.
	Valid values are:
	CR = Critical alarm
	MJ = Major alarm
	MN = Minor alarm
	NA = Not alarmed

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* INH-MSG-ALL:[tid]:[aidall]:[ctag]::[ntfcncde] */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* INH-MSG-ALL:[tid]:[aidall]:[ctag]::[ntfcncde] */ errcde

;

4200-A2-GB20-00 August 2002 14-9