Paradyne 4200 Act-Profile-Adslalm, 3. ACT-PROFILE-ADSLALM Command Parameters, Response Format

3. ADSL Facility Commands

ACT-PROFILE-ADSLALM

The ACT-PROFILE-ADSLALM command activates newly created ADSL alarm profiles. See ENT-PROFILE-ADSLALMon page 3-26for information on how to create a new ADSL alarm profile.

Table 3-3. ACT-PROFILE-ADSLALM Command Parameters

ACT-PROFILE-ADSLALM:[tid]:adsl_profile_id:[ctag][:];

RESTRICTIONS: All parameters in this command are position-defined. After a profile is activated, its parameters cannot be edited.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
adsl_profile_id	Numeric identifier of a profile (1− 30). Grouping and ranging are allowed.
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* ACT-PROFILE-ADSLALM:[tid]:adsl_profile_id:[ctag][:] */

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* ACT-PROFILE-ADSLALM:[tid]:adsl_profile_id:[ctag][:] */ errcde

;

3-4 August 2002 4200-A2-GB20-00