Paradyne 4200 RTRV-PM-ADSL Response Parameters 2 Explanation, RTRV-PM-ADSL Command Parameters

3. ADSL Facility Commands

Table 3-30. RTRV-PM-ADSL Response Parameters (2 of 2)

Parameter	Explanation
/* */	Enclosed are human readable comments – unspecified format
aid_adsl	As described for command parameters (see Table 3-29,
	RTRV-PM-ADSL Command Parameters), except that ALL is not used.
[aid_type]	Type of AID. The value is ADSL.
monadsl	As described for command parameters (see Table 3-29,
	RTRV-PM-ADSL Command Parameters), except that ALL is not used.
monval	Measured value for the monitored parameter (0− 4294967295).
[locn]	As described for command parameters (see Table 3-29,
	RTRV-PM-ADSL Command Parameters).
[tmper]	As described for command parameters (see Table 3-29,
	RTRV-PM-ADSL Command Parameters).
[mondat]	As described for command parameters (see Table 3-29,
	RTRV-PM-ADSL Command Parameters), except that ALL is not used.
[montm]	As described for command parameters (see Table 3-29,
	RTRV-PM-ADSL Command Parameters), except that ALL is not used.
errcde	Error code (see Appendix A, Error Codes)

Example

Retrieve the near-end errored seconds (fast channel) count above 5187 on ADSL rack 1, shelf 1, slot 1, circuit 9 for a 15-minute period beginning at 6:30 a.m. on June 10.

RTRV-PM-ADSL:TAMPA:ADSL-1-1-1-9:42::::;

TAMPA 02-07-03 12:30:43

M42 COMPLD /*

RTRV-PM-ADSL:TAMPA:ADSL-1-1-1-9:42:::ES-F,5187-UP,NEND,,15-M IN,06-10,6-30: */

"ADSL-1-1-1-9:ES-F,2015,,NEND,,15-MIN,06-10,6-30"

;

Related Commands

ED-ADSLon page 3-10

4200-A2-GB20-00 August 2002 3-39