Paradyne 4200 Rtrv-Cid-Secu, 12-12, 11. RTRV-CID-SECU Command Parameters, RTRV-CID-SECUtidcidctag

12. Security Commands

RTRV-CID-SECU

The RTRV-CID-SECU command retrieves the configuration data associated with the Channel Identifiers (CID).

Table 12-11. RTRV-CID-SECU Command Parameters

RTRV-CID-SECU:[tid]:cid:[ctag][:];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
cid	Calling address identifier. Valid values are:
	CRAFT: Local console interface
	REMOTE: Remote console interface
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD

/* RTRV-CID-SECU:[tid]:cid:[ctag] */ "cid:chap:cid_nblk"

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-CID-SECU:[tid]:cid:[ctag] */ aid:ERRCDE=errcde

/* error description */

;

12-12 August 2002 4200-A2-GB20-00