Paradyne 4200 manual 14-26, RTRV-NE-ALL Response Parameters 1 Explanation

14. System Commands

Table 14-22. RTRV-NE-ALL Response Parameters (1 of 3)

Parameter	Explanation
sid	Source NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_com	As described for command parameters (see Table 14-21,RTRV-NE-ALL
	Command Parameters).
ne_nblk	Named parameter block for NE. The block consists of one or more of
	the following parameters, each followed by an equal sign and a value.
	BOOTPVCI : ATM VCI of the PVC over which the NE issues BOOTP
	requests for ATM-1 (32− 65535).
	BOOTPVPI: ATM VPI of the PVC over which the NE issues BOOTP
	requests for ATM-1 (0− 4095)
	MEMALM: Status of alarm condition indicating loss or corruption of
	persistent memory. Values are:
	– ACTIVE: Persistent memory lost or corrupted
	– CLEAR: Persistent memory OK

DEFROUTER: IP address of default IP router. Values are:

–ddd.ddd.ddd.ddd: IP address (ddd = 1− 255)

–NONE: No default IP router is used

NETPOS: Position of the NE in the access subnetwork. Value is HUB (NE is directly connected to the network).

SNTP: Use of Simple Network Time Protocol to maintain NE clock.

Values are:

–ENABLED: Use SNTP

–DISABLED: Use NE local time set by the SET-DATcommand

TZOFFSET: Offset of local time zone from GMT/UTC, in minutes (-780−780). Used by the system if SNTP is enabled.

MEMDNLD: Whether external download of a system persistent database is enabled. Value is ENABLED (download allowed).

14-26 August 2002 4200-A2-GB20-00