Paradyne 4200 manual 10-32, 19. RTRV-COND-ALL Command Parameters 2 of, Response Format, IP c

10. Fault Commands

Table 10-19. RTRV-COND-ALL Command Parameters (2 of 2)

RTRV-COND-ALL:[tid]:aid_all:[ctag]::[cond_all],[locn], [dirn];

[dirn]	Direction of the condition. Valid values (for conditions supporting
	direction):
	RCV: Receive
	TRMT: Transmit
	If no value is specified, ALL is assumed.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

Mc COMPLD /*

RTRV-COND-ALL:[tid]:aid_all:[ctag]::[cond_all],[locn],[dirn] */

"aid,[aid_type]:ntfncde,cond,[serveff],,,[locn],[dirn],, [cond_descr]"

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-COND-ALL:[tid]:aid_all:[ctag]::[cond_all],[locn],[dirn] */

errcde

;

Table 10-20. RTRV-COND-ALL Response Parameters (1 of 2)

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed

10-32 August 2002 4200-A2-GB20-00