Paradyne 4200 Dlt-Crs-Vc, 1. DLT-CRS-VC Command Parameters, DLT-CRS-VCtidntvcl,ltvclctag, IP c

6. Cross Connect Commands

DLT-CRS-VC

The DLT-CRS-VC command deletes selected VC-level cross-connections between the NT and LT.

Table 6-1. DLT-CRS-VC Command Parameters

DLT-CRS-VC:[tid]:nt_vcl,lt_vcl:[ctag];

RESTRICTIONS: All parameters in this command are position-defined. This command requires two AID parameter entries to uniquely identify an existing cross-connection. A cross-connection must be place out of service before it can be deleted. A partial (PRTL) response is generated if all cross-connections cannot be deleted. The range of values for vpi and vci is determined by the number of VPI and VCI bits allocated.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
nt_vcl	Virtual Channel Identifier for the Virtual Channel Link on the NT
	(network) side. The value can be preceded with AID=, but this is not
	required. Grouping and ranging are allowed. Enter in the following
	format, replacing lower-case parameters with the values given:
	NTVCL-vpi-vci
	vpi: Virtual Path Identifier
	vci: Virtual Channel Identifier for the Virtual Channel Link
lt_vcl	Virtual Channel Identifier for the Virtual Channel Link on the LT (user)
	side. The value can be preceded with AID=, but this is not required.
	Grouping and ranging are allowed. Enter in the following format,
	replacing lower-case parameters with the values given:
	LTVCL-rack-shelf-slot-circuit-vpi-vci: ADSL interface
	– rack: Rack number (1)
	– shelf: Shelf number (1)
	– slot: LT slot number (1)
	– circuit: ADSL circuit on the LT (1− 4)
	– vpi: Virtual Path Identifier (for LT vpi=0, for NT vpi=0− 15)
	– vci: Virtual Channel Identifier for the virtual channel link (for LT
	vpi=32− 63, for NT vpi=32− 1023)
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses. The default is 0.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

6-2 August 2002 4200-A2-GB20-00