Paradyne 4200 manual Rtrv-Cond-Eqpt, 10-35, 21. RTRV-COND-EQPT Command Parameters

10. Fault Commands

RTRV-COND-EQPT

The RTRV-COND-EQPT command retrieves the current condition of specified equipment alarm indicators.

Table 10-21. RTRV-COND-EQPT Command Parameters

RTRV-COND-EQPT:[tid]:aidall_eqpt:[ctag]::[ntfcde],[cond_eqp t];

RESTRICTIONS: All parameters in this command are position-defined.

[tid]	The identification of the target NE. TID is optional and has a default
	value of null. The NE's SID code is the only other valid value.
aid_eqpt	Access Identifier for a piece of equipment. The value can be preceded
	with aid=, but this is not required. Grouping is allowed. Valid values are:
	ALL: All equipment units
	SHELF-rack-shelf
	LT-rack-shelf-slot: All LT units in slot
	LTA-rack-shelf-slot: LT unit A (main card)
	rack: rack number (1)
	shelf: shelf number (1)
	slot: LT slot number (1)
	Grouping is allowed. If no value is specified, ALL is assumed.
[ctag]	The correlation tag that correlates an input command with its associated
	output response(s). It is assigned by the originator of the command. The
	value is limited to six characters, which may be an identifier or a decimal
	numeral. It is optional with a default of 0.
[cond_eqpt]	Equipment condition. Valid values are:
	EQPT: Equipment failed self-test
	FANALM-1: Fan alarm for Fan 1
	FANALM-2: Fan alarm for Fan 2
	PROGVER: Failed to load or find requested software
	RMTDLFAIL: Failed to download software
	SWROLLBACK: Software version rolled back
	Grouping is allowed. If no value is specified, ALL is assumed.

4200-A2-GB20-00 August 2002 10-35