Paradyne 4200 manual Ed-Cid-Secu, 12-4, 3. ED-CID-SECU Command Parameters, Response Format, IP c

12. Security Commands

ED-CID-SECU

The ED-CID-SECU command edits the configuration data associated with the Channel Identifier (CID). The privilege codes associated with a CID define the maximum privilege level of commands in each category (maintenance, configuring, security, testing) that can be executed from that CID. Commands requiring a higher privilege level are refused.

Table 12-3. ED-CID-SECU Command Parameters

ED-CID-SECU:[tid]:cid:[ctag]::chap:[cid_nblk];

RESTRICTIONS: All parameters in this command are position-defined. A maximum of four remote (telnet) users and one Console terminal sessions can be active simultaneously.

[tid]	Identification of the target NE. The default value is null. The NE SID
	code is the only other valid value.
cid	Channel identifier. Grouping is allowed. Valid values are:
	CRAFT: Local console interface
	REMOTE: Remote console interface
[ctag]	Correlation tag (6 characters maximum) that links an input command
	with associated output responses.
chap	Channel Access Privilege. Specifies the maximum access privilege for
	commands on a channel. The only valid value is SUPER (maximum
	user privilege).
[cid_nblk]	Named parameter block for CID. The block consists of one or more of
	the following parameters, in any order separated by commas, each
	followed by an equal sign and a valid value. If not specified, the values
	of these parameters remain unchanged.
	MXINV: Maximum number of invalid logon alerts (3) before declaring an
	intrusion alert.
	TMOUT: Timeout interval for a user session, in minutes (0− 99). If the
	user is idle for this long, the session is automatically terminated. The
	default is 10. A value of 0 disables the feature.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

12-4 August 2002 4200-A2-GB20-00