Paradyne 4200 manual RTRV-IPPORT Response Parameters 1 Explanation

8. IP Access Commands

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY;

/* RTRV-IPPORT:[tid]:aid_ipport:[ctag][:] */ aid:ERRCDE=errcde

/* error description */

;

Table 8-16. RTRV-IPPORT Response Parameters (1 of 2)

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_ipport	As described for command parameters (see Table 8-15,RTRV-IPPORT
	Command Parameters), except that ALL is not used
cfg_mode	Configuration mode for the IP port. Values are:
	MANUAL: Port parameters are configured by the operator
	BOOTP: Port parameters are configured using the BOOTP protocol
ipport_nblk	Named parameter block for IP Port. The block consists of the following
	parameters separated by commas, each followed by an equal sign and
	a value.
	IPADDR: IP address associated with the port. Address entered by user
	if cfg_mode=MANUAL; auto-configured if cfg_mode=BOOTP. The
	format is:
	– ddd.ddd.ddd.ddd (where ddd is a number 0− 255).
	NETMASK: IP address network mask. Configured value if
	cfg_mode=MANUAL; auto-configured if cfg_mode=BOOTP. The format
	is:
	– ddd.ddd.ddd.ddd (where ddd is a number 0− 255).
	PHYADDR: Physical address associated with the port. Must be unique.
	The format is:
	– xx-xx-xx-xx-xx-xx-xx-xx (where each x is a hexadecimal digit
	0− F). This is the MAC address originally assigned to the unit if
	aid_ipport=ETH-1.

8-20 August 2002 4200-A2-GB20-00