Paradyne 4200 manual ATM VCL Configuration Group RFC, C-16, Object, Description, Setting/Contents

C. Traps and MIBs

ATM VCL Configuration Group (RFC 2515)

Contains configuration and state information of a bidirectional VCL at an ATM interface. The atmVclEntry is supported as shown in Table C-7, VCL Configuration MIB Group Objects.

Table C-7. VCL Configuration MIB Group Objects

Object	Description	Setting/Contents
atmVclOperStatus	Operational status of the VCL.	Possible values are:
(atmVclEntry 4)		up(1): VCL is currently operational
		Tdown(2): VCL is currently not operational
		unknown(3): The state of the VCL cannot
		be determined.
atmVclLastChange	Contains the value of the sysUpTime	Integer. If the current state was entered into
(atmVclEntry 5)	object at the time the VCL entered its	prior to the last reinitialization of the agent,
	current operational state.	then this object contains a zero value.
atmVccAalType	Identifies the type of AAL used with the	he only valid values are:
(atmVclEntry 8)	VCC.	Taal5(3): AAL5
		unknown(5): The AAL type cannot be
		determined.
atmVccAal5CpcsTransmit	Contains the maximum Common Part	Not supported.
SduSize (atmVclEntry 9)	Convergence Sublayer SDU size
	supported in the transmit direction of
	this VCC.
atmVccAal5CpcsReceive	Contains the maximum Common Part	Not supported.
SduSize (atmVclEntry 10)	Convergence Sublayer SDU size
	supported in the Receive direction of
	this VCC.
atmVclEncapsType	Specifies the type of data encapsulation	Not supported.
(atmVclEntry 11)	used over the AAL5 Service Specific
	Convergence Sublayer.

C-16 August 2002 4200-A2-GB20-00