Paradyne 4200 manual 10-3, aidadsl,aidtypentfncde,condadsl,serveff,,,locn, dirn,conddescr, IP c

10. Fault Commands

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss M c COMPLD

/* RTRV-ALM-ADSL:[tid]:aid_adsl:[ctag]::[ntfncde] ,,[srveff] */

"aid_adsl,aid_type:ntfncde,cond_adsl,serveff,,,locn, dirn,:cond_descr"

;

Error Response:

sid yy-mm-dd hh:mm:ss M c DENY

/* RTRV-ALM-ADSL:[tid]:aid_adsl:[ctag]::[ntfncde],, [srveff] */

errcde

;

Table 10-2. RTRV-ALM-ADSL Response Parameters (1 of 2)

Parameter	Explanation
tid	Target NE identification
yy-mm-dd	Year, month, and day
hh:mm:ss	Hour, minute, and second
M	Message generated in response to an input command
c	If provided, ctag; otherwise 0
COMPLD	Completed
DENY	Input command is denied
/* */	Enclosed are human readable comments – unspecified format
errcde	Error code (see Appendix A, Error Codes)
aid_adsl	As described for command parameters (see Table 10-1,
	RTRV-ALM-ADSL Command Parameters), except that ALL is not used.
[aid_type]	The type of Access Identifier. The value is ADSL.
ntfncde	As described for command parameters (see Table 10-1,
	RTRV-ALM-ADSL Command Parameters), except that ALL is not used.

4200-A2-GB20-00 August 2002 10-3